Products
Contact us
Panel Parts
Your position：Home > Products > Panel Parts >
  • SF-095

Product Name：

Product Model：

Wechat：15088970667

WhatsApp：008615088970667

Send Inquiry

  • Parameters
SF 095
Load 500g after a 24h waiting period¹
Mounting self-adhesive (non-ageing, high-performance adhesive band)
Materialplastic according to UL94 V-0
Dimensions43 x 38 x 14mm
Screw pitch 12.8mm, Ø 3.6mm; for perforated 35mm DIN rails
Operating/Storage temperature-45 to +70°C (-49 to +158°F)

¹ depending on the conditions of use (e.g. surface condition, size of the device to be mounted, etc.) higher loads were achieved.


Art. No.1 packing unitWeight (approx.)
09510.0-011 pc

12g


  • Features

> Direct fixing of small appliances and 35mm DIN rails

> Simple to mount

> Self-adhesive

  • Structure Chart

Installation: Holder Fix can only be mounted on smooth surfaces, e.g. metals, lacquered surfaces and plastics (except polyethylene, polypropylene and rubber). The surfaces must be dry, free from dust, oil, separating agents and other contamination.

Panel Parts Structure Chart

Note: When using the Holder Fix as a DIN rail holder, only DIN rails (EN 60715) with perforation 18 x 6.2mm or 18 x 5.2mm can be used.


  • Certification

  • Application

With Holder Fix small appliances can be mounted in enclosures significantly quicker, easier and more economically than before, without drilling holes. Mounting DIN rails is a simple matter with Holder Fix. Longer rails are mounted on several Holder Fix units and joining two rails is also not a problem. Subsequent changes and the mounting of additional appliances can be carried out with ease – even in confined spaces. Holder Fix is a self-adhesive plastic unit with an adhesion power which will bear a continuous load of 500g. The high-performance industrial adhesive band is also nonageing and designed with safety tolerances.

Comments Box


Hot products

sinqury
Follow us : facebook Linkedin
X