Products
Contact us
Thermostat
Your position:Home > Products > Thermostat >
  • Electronic Thermostat NT 75-F

Product Name:Electronic Thermostat NT 75-F

Product Model:NT 75-F


Wechat:15088970667

WhatsApp:008615088970667

Send Inquiry

  • Parameters

Electronic Thermostat NT

Technical Data

NT 75-F
Switch temperature difference5K (-3/+2K tolerance)¹
sensor elementNTC
Contact typechange-over snap-action contact
service life >100,000 cycles
Max.switching caoacity10mA
Max. switching capacityNC: 250VAC, 10 (4) A
NO: 250VAC, 5 (2) A
Max.inrush currentAC 16A for 10 sec.
Connection4-pole terminal, clamping torque 0.5Nm max.:
rigid/stranded² wire 2.5mm² (AWG 14)
Mountingclip for 35mm DIN rail, EN 60715
Casingplastic according to UL94 V-0, light grey
Dimensions67x50x38mm
Weightapprox.60g
Fitting Positionvariable
Operating/Stirage temperature-20 to +60℃(-4 to +140℉)
Operating/Stirage humiditymax.90% RH (non-condensing)
Protection typeIP20

¹ If the Normally Closed contact is used, the switch temperature difference could be reduced by connecting terminal "N" (RF heating resistor). It causes the thermal feedback which is subject to surrounding conditions and thus has to be determined for each individual application.

² When connecting with wires, wire end ferrules must be used.


Art.No.Contact breaker(NC)Setting Range Operating Voltage
860050-20 to +60°C230VAC, 50/60Hz


  • Features

• Adjustable temperature

• High switching capacity

• Small hysteresis

• Change-over contact

• Clip fixing

  • Structure Chart

Electronic Thermostat NT

Electronic Thermostat NT

  • Certification
  • Application

The electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact. Functionality: The temperature setting on the scale equals to the upper switch point, which means that the NC contact opens. The temperature setting minus switch temperature difference (and tolerances) equals to the lower switch point, which means that the NC contact closes.

  • Video

Comments Box



sinqury
Follow us : facebook Linkedin
X