Contact us
Your position:Home > Products > Hygrostat >
  • NT 82-F

Product Name:

Product Model:



Send Inquiry

  • Parameters
NT 82-F
Switch temperature difference5K (-3/+2K tolerance)¹
Sensor element NTC
Contact typechange-over snap-action contact
Service life>100,000 cycles
Min. switching capacity 10mA
Max. switching capacity NC: 250VAC, 10 (4) A
NO: 250VAC, 5 (2) A
Max. inrush current AC 16A for 10 sec.
Connection 4-pole terminal, clamping torque 0.5Nm max.:
rigid/stranded² wire 2.5mm² (AWG 14)
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 67 x 50 x 38mm
Weight approx. 60g
Fitting positionvariable
Operating/Storage temperature-20 to +60°C (-4 to +140°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type IP20

¹ If the Normally Closed contact is used, the switch temperature difference could be reduced by connecting terminal "N" (RF heating resistor). It causes the thermal feedback which is subject to surrounding conditions and thus has to be determined for each individual application.

² When connecting with wires, wire end ferrules must be used.

Art. No. Contact breaker (NCSetting Range Operating Voltage
860740 -20 to +60°C 230VAC, 50/60Hz

  • Features

• Adjustable temperature

• High switching capacity

• Small hysteresis

• Change-over contact

• Clip fixing

  • Structure Chart


  • Application

The electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact. Functionality: The temperature setting on the scale equals to the upper switch point, which means that the NC contact opens. The temperature setting minus switch temperature difference (and tolerances) equals to the lower switch point, which means that the NC contact closes.

Comments Box

Follow us : facebook Twitter Linkedin Pinterest GooglePlus