3 Years Warranty: All our products adapt UL listed New Material, we never adapt used material.
Language
Dual Thermostat NT 71-F
Features

NO and NC in one casing


Separate adjustable temperatures


High switching capacity


Terminals easily accessible


Clip fixing

Product Description

Two thermostats in one casing:

Thermostat (contact breaker, normally closed) for regulating heaters. The contact opens when temperature is rising.

Thermostat (contact maker, normally open) for regulating filter fans and heat exchangers or switching signal devices when temperature limit has been exceeded. The contact closes when temperature is rising.

Heaters and cooling equipment can be switched independently from each other with a temperature offset as opposed to the usual change-over contacts.

Technical Data

0.jpg

Technical Data

NT 71-F

Switch temperature difference

+/-5℃

sensor element

thermostatic bimetal

Contact type

snap-action contact

service life 

>100,000 cycles

Max.switching caoacity

250VAC, 10 (2) A 

Max.inrush current

AC 16A for 10 sec.

Connection

2-pole terminal,clamping torque 0.5Nm max.:rigid wire 2.5mm²(AWG 14)

stranded wire1 1.5mm²(AWG 16)

Mounting

clip for 35mm DIN rail,EN 60715

Casing

plastic according to UL94 V-0, light grey

Dimensions

60x50x46mm

Weight

approx.90g

Fitting Position

variable

Operating/Stirage temperature

-45 to +80℃(-49 to +176℉)

Operating/Stirage humidity

max.90% RH (non-condensing)

Protection type

IP20


Mounting options

When connecting with wires, wire end ferrules must be used.

Important note: The contact system of the regulator is subjected to environmental influences, thus the contact

resistance may change. This can lead to a voltage drop and/or self-heating of the contacts.

Art.No.

Setting range

Signal current 

860041

Contact breaker(NC)

0 to +60℃

Contact maker(NC)

0 to +60℃

860042

Contact breaker(NC)

+32 to 140℉

Contact maker(NC)

+32 to 140℉

860043

Contact breaker(NC)

-10 to +50℃

Contact maker(NC)

+20 to +80℃

860044

Contact breaker(NC)

+14 to +122℉

Contact maker(NC)

+68 to +122℉

860045

Contact maker(NC)

0 to +60℃

Contact maker(NC)

0 to +60℃

860046

Contact maker(NC)

+32 to 140℉

Contact maker(NC)

+32 to 140℉


Structure Chart

0.jpg 

Certificate
Video


Related Products